Skip to Content
  1. All products
  2. AKV PP Sediment Filter 2.5" x 10" 5 mic
  3. All products
Pricelist: AKV Estonia Pricelist
Pricelist: AKV Estonia Pricelist
New!
AKV PP Sediment Filter 2.5" x 10" 5 mic

AKV PP Sediment Filter 2.5" x 10" 5 mic

A high-efficiency replacement filter element designed for mechanical pre-filtration in under-sink and reverse osmosis systems. Manufactured from 100% pure melt-blown polypropylene, this cartridge captures suspended solids, sand, silt, rust, and dirt particles down to 5 microns, protecting downstream filters and delicate RO membranes from premature clogging.


1.40 € 1.40 € (Tax included)
1.40 € (Tax included)

  • Packaging
Add to cart
Buy now
Terms and Conditions

Internal Reference: 424893
Barcode: 4751051210356

Featuring a true gradient-density multi-layer structure, the cartridge delivers superior dirt-holding capacity and minimal pressure drop. Outer layers trap larger debris while the inner core retains micro-particulates, ensuring uniform filtration across the entire media volume. Free from chemical binders and solvents, it operates reliably across standard operating pressures and temperatures as an essential first-stage sediment barrier.

Removal Capabilities:

  • Sediment Filtration: Traps microscopic insoluble particles down to 5 microns, including rust flakes and fine sediment.

  • Suspended Solids Reduction: Retains sand, silt, clay, and soil particles from municipal or well water supplies.

  • Equipment Protection: Prevents physical blockage of carbon blocks, softening resins, and reverse osmosis membranes.

  • Turbidity Elimination: Reduces water cloudiness and mechanical haziness to deliver clear pre-filtered water.

Technical Characteristics of the Cartridge:

  • Product Type: Melt-Blown Polypropylene Sediment Filter Cartridge

  • Material Composition: 100% Pure Polypropylene

  • Structure: Multi-layer true gradient density

  • Filtration Rating: 5 micron

  • Standard Form Factor: 10 inches x 2.5 inches (Standard Slim Line 10")

  • Compatibility: Standard 10-inch filter housings

  • Standard Packaging: Individual wrapper

Recommended Operational Conditions:

  • Maximum Operating Temperature: 77°C (170°F)

  • Maximum Operating Pressure: 8.6 bar (125 psi)

  • Recommended Service Flow Rate: 10–15 L/min

  • Recommended Replacement Interval: 3–6 months

Please note: To maintain optimal flow rates and protect downstream filters, replace the cartridge when a visible pressure drop occurs or at the recommended service interval.