Skip to Content

Clack WS 1" CI Twin Alternating Control Valve VTT1CIDME-03

The Clack WS 1" CI Twin Alternating Control Valve (VTT1CIDME-03) is a commercial-grade, microprocessor-controlled duplex valve system engineered in the United States for uninterrupted 24/7 water softening and media filtration. Constructed from heavy-duty, corrosion-resistant fiber-reinforced composite polymer and certified to NSF/ANSI/CAN 61, 44, and 372 standards, this alternating twin-tank control assembly manages two pressure vessels from 6" to 21" in diameter simultaneously. Delivering continuous service flow rates up to 6.36 m³/h (106 L/min / 28 gpm) with zero raw-water downtime during regeneration cycles, it is designed for commercial buildings, boiler feed systems, hospitality venues, and large residential installations requiring a continuous supply of treated water.

545.45 € 545.45 € (Tax included)
545.45 € (Tax included)


Internal Reference: 315431
Barcode: 1872025004061

Engineered with a solid-state electronic controller, integrated turbine water meter (±5% accuracy), and a backlit front-panel LCD display, the VTT1CIDME-03 automatically switches service between Tank A and Tank B upon capacity exhaustion while regenerating the depleted vessel with soft/treated water. The valve supports four regeneration initiation modes (meter immediate, meter delayed, 1–28 day time-clock override, or external differential pressure switch) and up to 9 fully programmable cycle steps for both downflow and upflow regeneration. Equipped with a one-piece expanding seal spacer stack, linearly reciprocating piston, dual solid-state auxiliary relay outputs, and non-volatile memory with a replaceable 3V CR2032 lithium battery backup, this bare twin-valve unit allows system integrators to select custom port fittings, power supplies, drain line flow controls (DLFC), and bypass assemblies tailored to their specific installation.

Functional Features:

  • Uninterrupted 24/7 Twin-Alternating Operation: Automatically transfers service flow between two tanks (Tank A and Tank B) when one reaches capacity, ensuring continuous soft or filtered water with zero untreated bypass during regeneration.

  • Soft-Water Regeneration & Refill: Regenerates and refills the standby tank using treated water from the active vessel, maximizing resin cleaning efficiency and preventing scale buildup inside the valve.

  • High-Flow Service & Backwash Performance: Delivers up to 6.36 m³/h (106 L/min / 28 gpm) in service mode and 3.40 m³/h (57 L/min / 15 gpm) in backwash mode (up to 6.12 m³/h / 102 L/min depending on DLFC configuration).

  • 4 Flexible Regeneration Triggers & 9 Programmable Cycles: Supports meter-immediate, meter-delayed, time-clock (1–28 days), or dP-switch initiation across up to 9 customizable cycle stages (co-current or counter-current brining).

  • Certified Heavy-Duty Composite Design: Certified to NSF/ANSI/CAN 61, 44, and 372, featuring a fiber-reinforced composite body, one-piece seal spacer stack, dual 12 V DC relay outputs, and CR2032 lithium battery backup.

Technical Characteristics of the Control Valve:

  • Product Type: Twin-Alternating Automatic Softener / Filter Control Valve (Bare Valve Unit)

  • Manufacturer / Model: Clack Corporation / WS1 CI Twin Alternating (SKU: VTT1CIDME-03)

  • Certifications: NSF/ANSI/CAN 61, NSF/ANSI 44, and NSF/ANSI/CAN 372

  • Regeneration Control Logic: Volumetric Metered (Immediate / Delayed), Time-Clock Override (1–28 days), or Differential Pressure (dP Switch)

  • Regeneration Flow Direction: Downflow (co-current) or Upflow (counter-current)

  • Service Flow Rate: 6.36 m³/h (106 L/min / 28 gpm at 1 bar / 15 psi drop; Cv = 7.28)

  • Backwash Flow Rate: 3.40 m³/h (57 L/min / 15 gpm at 1.7 bar / 25 psi drop; Cv = 2.96; max body capacity 6.12 m³/h)

  • Integrated Water Meter: Accuracy ±5%; Flow range 0.95–102 L/min; Volume range 0.02–5,700 m³

  • Valve Body Material: Fiber-Reinforced Composite

  • Programmable Cycles: Up to 9 cycles (Backwash: 1–120 min; Brine: 1–180 min; Rinse: 1–120 min; Pause: 1–480 min; Refill: 0.05–90.0 kg or 0.2–76.0 L)

  • Compatible Tank Diameters: Dual 6" to 21" pressure vessels

  • Auxiliary Relay Outputs: Dual solid-state 12 V DC wet contacts (max. 100 mA per relay / 200 mA total)

  • Required Power Input: 15 V DC, 500 mA (power supply adapter sold separately)

  • Package Contents: Clack WS1 CI twin-alternating control valve assembly with electronic drive and interconnect cable (inlet/outlet fittings, power supply, DLFC button, and bypass valve are not included)

Dimensions and Installation Specifications:

  • Inlet / Outlet Port Size: 1" (compatible with 3/4" to 1.5" NPS connection fittings, sold separately)

  • Tank Mounting Thread: 2 1/2" – 8 NPSM (for both primary and secondary tanks)

  • Distributor Riser Tube Pilot: 1.050" OD (3/4" NPS)

  • Drain Line Connection: 3/4" or 1" NPT (requires separate DLFC flow control button)

  • Brine Line Connection: 3/8" or 1/2" OD poly tube compression

  • Valve Height (Above Tank): 187 mm (7 3/8")

  • Unit Weight: 7.25–7.5 kg (16 lbs)

  • Operating Water Pressure: 1.4 to 8.6 bar (20–125 psi)

  • Operating Water Temperature: +4 to +43 °C (40 to 110 °F)

Please note: This item includes the bare twin-alternating control valve assembly only; the 15 V DC power supply adapter, inlet/outlet connection fittings, bypass valve, and drain line flow control (DLFC) button are sold separately according to your specific vessel diameter and piping configuration. Install an appropriately sized DLFC button to prevent resin or media loss during backwash cycles. Ensure power is disconnected before wiring external devices to the PC board relay terminal block, and replace the 3V CR2032 lithium backup battery if the time-of-day display flashes after brief power interruptions.