Ecosoft Anthracite Gold 250 Well Water Softener

Automated filtration and regeneration cycles are directed by the premium, pre-adjusted US-made Clack® DV (Ecosoft Diamond Valve) electronic disc control valve. Featuring diamond-coated ceramic-to-ceramic sealing discs, the valve resists abrasive suspended particles and operates reliably on raw well water without mechanical scoring or seizing. The unit tracks water usage with an integrated electronic turbine meter to execute automated volumetric meter-delayed regeneration (backwash, brine draw, slow rinse, second backwash, and fast rinse) only when the capacity is depleted. Complete with a pre-wired European 12 V power adapter, 3/4" male BSPT plumbing connection kit, and flexible drain/overflow tubing with stainless steel clamps, the Anthracite Gold 250 provides comprehensive well water purification in a tidy, plug-and-play layout.

Functional Features:

• Comprehensive 5-in-1 Well Water Filtration: Proprietary ECOMIX® A media treats hardness, dissolved iron, manganese, natural organic compounds (COD), and ammonium in a single vessel without requiring multiple filtration stages.

• Industrial-Grade Clack® DV Ceramic Disc Valve: Premium US-made control valve uses diamond-coated ceramic disc technology that eliminates friction wear and ensures leak-free reliability under abrasive raw water conditions.

• High-Capacity Brine Reservoir: Large cabinet salt storage capacity (88 to 130 kg) significantly reduces maintenance frequency, allowing up to 7 months of continuous operation on a single salt load.

• Volumetric Demand-Initiated Regeneration: Internal water meter measures exact water throughput to initiate cleaning cycles only when needed, minimizing salt and wastewater consumption.

• Built-in Residual Hardness Mixing Valve: Integrated blending screw on the valve body allows technicians to bypass a controlled portion of raw water to tailor final water softness.

• Robust Monoblock Cabinet Enclosure: Heavy-duty, scratch-resistant rotomolded housing protects the internal 1035 structural pressure vessel and includes a dedicated brine well with a safety air-check float valve.

• Complete Installation Kit: Supplied with a 3/4" male BSPT connection kit, EU 12 V power supply adapter, flexible drain and overflow lines, and hose clamps.

Please note: The system must be installed indoors in a dry room protected from sub-zero temperatures (minimum ambient temperature +5 deg C) and away from direct heat sources. An upstream sediment prefilter (100 micron or finer) is required to stop large sand, silt, and rust flakes from entering the system. Always maintain salt levels above the water line inside the brine well (ideally two-thirds full using tablet salt of >99% purity) to guarantee saturated brine preparation. Route the valve drain hose and the cabinet overflow pipe to a gravity drain fixture with a minimum 1-inch (25 mm) air gap to prevent sanitary sewage back-siphonage. During extended absences (such as vacations), switch the unit into bypass mode and isolate the power supply.