Skip to Content
  1. All products
  2. Pre-filtration
  3. Ecosoft 1/2" Transparent In-Line Sediment Water Filter
  4. Pre-filtration
Pricelist: AKV Estonia Pricelist
Pricelist: AKV Estonia Pricelist

Ecosoft 1/2" Transparent In-Line Sediment Water Filter

A compact, point-of-entry in-line sediment filter engineered for cold municipal water purification in apartments with 1 bathroom and small residential properties. Manufactured in Europe from pure, food-grade BPA-free plastic, the crystal-clear styrene-acrylonitrile (SAN) bowl allows effortless visual monitoring of cartridge contamination without disassembling the unit. Serving as an essential first-line mechanical barrier, it traps coarse suspended solids such as sand, rust flakes, silt, and pipe scale to protect faucets, mixer valves, and household appliances from premature wear and blockage.

14.46 € 14.46 € (Tax included)
14.46 € (Tax included)

Add to cart
Buy now
Terms and Conditions

Internal Reference: FPV12ECO

Engineered with 1/2" female threaded ports reinforced with high-quality brass bushings, the filter integrates securely into standard domestic cold water pipelines with minimal pressure drop. It operates reliably at a maximum flow rate of 10 L/min (2.5 gpm) under recommended working pressures from 3.5 to 4.0 bar (withstanding maximum pressures up to 6.0 bar / 87 psi) across water temperatures from +3 to +43 °C. The complete package arrives ready for wall-mounted installation, supplied with a pre-installed 10" 5-micron melt-blown polypropylene sediment cartridge, a mounting bracket, fixing screws, and an ergonomic service wrench.

Removal Capabilities:

  • Mechanical Sediment Interception: Captures insoluble suspended particulates down to 5 microns, including sand grains, rust flakes, pipe scale, and grit.

  • Silt & Clay Retention: Eliminates fine clay, mud, and mineral deposits from municipal tap water supplies.

  • Plumbing & Appliance Protection: Shields ceramic disc mixers, shower heads, washing machines, and dishwashers from abrasive wear and mechanical clogging.

  • Turbidity & Clarity Correction: Reduces water cloudiness and mechanical haziness to deliver clear pre-filtered water throughout the apartment.

Technical Characteristics of the Filter:

  • Product Type: Transparent In-Line Sediment Filter Housing with Cartridge

  • Manufacturer / Model: Ecosoft / FPV12ECO

  • Form Factor / Standard Size: 10" (Standard Slim Line 10" / 2.5" × 10")

  • Inlet / Outlet Connection Size: 1/2" female thread (in-line connection with brass bushings)

  • Head Material: Food-grade polypropylene (PP)

  • Bowl Material: Transparent styrene-acrylonitrile (SAN)

  • Included Replacement Element: 10" PP melt-blown sediment cartridge, 5 micron rating

  • Maximum Flow Capacity: 10 L/min (2.5 gpm / 0.6 m³/h)

  • Unit Weight (Net / Gross): 1.0 kg / 1.05 kg

  • Housing Design Service Life: 5 years

  • Package Contents: Transparent filter housing (head and bowl), 10" 5 µm PP sediment cartridge, plastic wall-mounting bracket, 4 bracket screws, service wrench, user manual

Recommended Operational Conditions:

  • Operating Water Temperature Range: +3 to +43 °C (+37 to +109 °F; manual rating: +5 to +40 °C)

  • Recommended Operating Pressure: 3.5 to 4.0 bar (50 to 60 psi)

  • Maximum Working Pressure: 6.0 bar (87 psi)

  • Recommended Cartridge Replacement Interval: Every 2 to 6 months (or visually when the element becomes visibly fouled, depending on water quality and usage)

Please note: Shut off the main water supply and relieve pipeline pressure before installing the housing or servicing the cartridge. To protect the transparent bowl against sudden hydraulic shocks or municipal pressure spikes exceeding 4.0 bar, installing a pressure-reducing valve upstream of the filter is strongly recommended. Seal threaded connections with PTFE tape, ensure the rubber O-ring is properly seated in the groove, and hand-tighten the bowl before gently snugging it with the included service wrench; avoid over-tightening. Intended strictly for cold potable water filtration—do not expose to hot water, freezing temperatures, or direct sunlight. Inspect all connection joints for tightness over the first 2 hours following installation or filter replacement.