Skip to Content
  1. All products
  2. Pre-filtration
  3. Ecosoft 1/2" In-Line Hot Water Sediment Filter
  4. Pre-filtration
Pricelist: AKV Estonia Pricelist
Pricelist: AKV Estonia Pricelist

Ecosoft 1/2" In-Line Hot Water Sediment Filter

A high-temperature, point-of-entry in-line water filter engineered specifically for the mechanical filtration of domestic and municipal hot water supplies in apartments and private houses. Molded from heavy-duty glass fiber-reinforced polypropylene (GFPP), the heat-resistant housing operates continuously under elevated temperatures without thermal warping, pressure-induced expansion, or material degradation. It acts as a primary mechanical barrier that intercepts coarse rust flakes, silt, sand particles, and pipe scale from hot water loops, protecting sanitary fixtures, thermostatic mixers, valves, and water-connected appliances such as dishwashers and washing machines from premature wear and particulate blockage.

16.53 € 16.53 € (Tax included)
16.53 € (Tax included)

  • Brand
Add to cart
Buy now
Terms and Conditions
Documents
Manual for Ecosoft in-line filters.pdf Ecosoft sediment water filter technical data sheet.pdf

Internal Reference: FPV12HWECO
Barcode: 4820056801705

Engineered with high-integrity 1/2" female threaded ports (reinforced with threaded brass inserts), the unit integrates directly into standard domestic hot water distribution pipework with minimal hydrodynamic resistance. It operates reliably at water temperatures up to +80 °C under working pressures from 2.0 to 4.0 bar (withstanding maximum pressures up to 6.0–8.6 bar / 87–125 psi). The complete package comes equipped with an installed 10" 5-micron hot-water-rated polypropylene sediment cartridge, a heavy-duty wall-mounting bracket with fixing screws, and an ergonomic service spanner wrench for convenient cartridge maintenance.

Removal Capabilities:

  • Hot Water Sediment Interception: Captures insoluble mechanical particles down to 5 microns, including boiler rust flakes, mineral scale, sand, and pipe debris.

  • Suspended Solids & Clay Retention: Eliminates clay, mud, and suspended particulates to clarify hot water supplies across household and apartment outlets.

  • Plumbing & Appliance Protection: Shields expensive thermostatic mixing valves, shower heads, aerators, washing machines, and dishwashers from abrasive sediment wear.

  • Turbidity Correction: Improves overall water clarity and eliminates discoloration caused by suspended mineral particles.

Technical Characteristics of the Filter:

  • Product Type: In-Line Hot Water Sediment Filter Housing with Cartridge

  • Manufacturer / Model: Ecosoft / FPV12HWECO

  • Form Factor / Standard Size: 10" (Standard Slim Line 10")

  • Inlet / Outlet Connection Size: 1/2" female thread (in-line connection with brass ports)

  • Housing Material: Glass Fiber-Reinforced Polypropylene (GFPP)

  • Bowl Material: Heat-resistant reinforced polypropylene (PP)

  • Included Replacement Element: 10" PP melt-blown hot water sediment cartridge, 5 micron rating

  • Maximum Water Flow Rate: 10 L/min (approx. 2.5 gpm / 0.6 m³/h)

  • Filter Dimensions (H × W × D): 345 mm × 142 mm × 115 mm

  • Housing Design Service Life: 5 years

  • Package Contents: Filter housing (head and bowl), 10" 5 µm hot-water PP cartridge, plastic wall-mounting bracket, 4 bracket screws, service wrench, instruction manual

Recommended Operational Conditions:

  • Operating Water Temperature Range: +3 to +80 °C (+37 to +176 °F; manual operating rating +5 to +75 °C)

  • Recommended Working Pressure: 2.0 to 4.0 bar (approx. 30 to 60 psi)

  • Maximum Working Pressure: 6.0 bar (87 psi; proof burst rating up to 8.6 bar / 125 psi)

  • Recommended Cartridge Replacement Interval: Every 3 to 6 months (depending on hot water quality, throughput, and sediment load)

Please note: Shut off the hot water supply valve and relieve line pressure by opening a downstream faucet before performing installation or cartridge servicing. To prevent housing damage from sudden water hammer or municipal distribution pressure surges exceeding 4–6 bar, installing a pressure-reducing valve upstream of the filter is strongly recommended. Seal threaded connections with PTFE tape, ensure the rubber O-ring is properly seated in the head groove, and screw the bowl on hand-tight before gently snugging it with the included wrench; avoid over-tightening. Check for connection leaks continuously over the first 2 hours after initial pressurization or cartridge replacement. Use only standard 10" replacement cartridges certified for hot water applications up to +80 °C.

Specifications

Brand Ecosoft