Skip to Content
  1. All products
  2. Pre-filtration
  3. Ecosoft 1/2" High-Pressure In-Line Sediment Water Filter
  4. Pre-filtration
Pricelist: AKV Estonia Pricelist
Pricelist: AKV Estonia Pricelist

Ecosoft 1/2" High-Pressure In-Line Sediment Water Filter

A heavy-duty, point-of-entry in-line water filter engineered specifically for municipal and private residential water supplies characterized by unstable line pressure and high sediment loads. Built with an ultra-durable reinforced polypropylene (PP) housing tested under extreme conditions to withstand pressure spikes up to 30 bar (435 psi), it prevents leaks and body deformation where standard domestic filter housings may fail. Serving as an essential primary defense line, the filter intercepts abrasive suspended solids, sand, rust, scale, and clay before they reach domestic plumbing fixtures, sanitary ware, and home appliances.

14.46 € 14.46 € (Tax included)
14.46 € (Tax included)

  • Brand
Add to cart
Buy now
Terms and Conditions
Documents
Manual for Ecosoft in-line filters.pdf Ecosoft sediment water filter technical data sheet.pdf

Internal Reference: FPV12PECO
Barcode: 4820056802306

Engineered with full-flow 1/2" female threaded ports (reinforced with threaded brass inserts), the unit integrates seamlessly into standard domestic cold water distribution pipework with minimal pressure loss. It operates within a recommended working pressure range of 2.0 to 4.0 bar (withstanding continuous working pressures up to 6.0 bar) across operating water temperatures from +3 to +43 °C. The complete package comes ready for immediate wall mounting, equipped with an installed 10" 5-micron polypropylene sediment cartridge, a wall-mounting bracket, fixing screws, and an ergonomic service spanner wrench for convenient cartridge maintenance.

Removal Capabilities:

  • Sediment & Particulate Interception: Captures insoluble mechanical particles down to 5 microns, including coarse rust flakes, pipe scale, sand, and grit.

  • Suspended Solids & Clay Retention: Eliminates clay, silt, mud, and insoluble mineral debris from municipal or private well supplies.

  • Plumbing & Appliance Protection: Shields ceramic cartridge faucets, shower valves, washing machines, dishwashers, and water heaters from abrasive mechanical wear and blockage.

  • Turbidity Correction: Clears mechanical cloudiness and sediment haziness to deliver clean, clear pre-filtered water across household fixtures.

Technical Characteristics of the Filter:

  • Product Type: High-Pressure In-Line Sediment Filter Housing with Cartridge

  • Manufacturer / Model: Ecosoft / FPV12PECO

  • Form Factor / Standard Size: 10" (Standard Slim Line 10")

  • Inlet / Outlet Connection Size: 1/2" female thread (in-line connection with brass inserts)

  • Housing Material: High-strength reinforced polypropylene (PP)

  • Bowl Material: Reinforced opaque polypropylene (PP)

  • Included Replacement Element: 10" PP melt-blown sediment cartridge, 5 micron rating

  • Maximum Water Flow Rate: 10 L/min (approx. 2.5 gpm / 0.6 m³/h)

  • Filter Dimensions (H × W × D): 345 mm × 142 mm × 115 mm

  • Housing Design Service Life: 5 years

  • Package Contents: Filter housing (head and bowl), 10" 5 µm PP cartridge, wall-mounting bracket, 4 bracket screws, service wrench, instruction manual

Recommended Operational Conditions:

  • Operating Water Temperature Range: +3 to +43 °C (+37 to +109 °F; manual standard: +5 to +40 °C)

  • Recommended Working Pressure: 2.0 to 4.0 bar (approx. 30 to 60 psi)

  • Maximum Working Pressure: 6.0 bar (87 psi)

  • Extreme Pressure Resistance (Proof/Burst Rating): Tested up to 30 bar (435 psi)

  • Recommended Cartridge Replacement Interval: Every 3 to 6 months (depending on raw water quality, consumption volume, and sediment accumulation)

Please note: Depressurize the pipeline and isolate the water supply before installation or cartridge servicing. While the reinforced housing is tested against extreme pressure spikes up to 30 bar, installing a pressure regulator is recommended if continuous line pressure exceeds normal working limits. Seal all threaded pipe fittings with PTFE tape, seat the internal sealing O-ring properly, and hand-tighten the bowl before snugging it with the supplied service wrench; avoid over-tightening. This unit is intended exclusively for cold potable water lines—do not use on hot water circuits. Inspect all connection joints for tightness during the first 2 hours following initial pressurization or filter replacement.

Specifications

Brand Ecosoft