Automated process control is managed by the proprietary Ecosoft OC5000 microprocessor controller with an intuitive backlit LCD interface, governing automatic production cycles, low-pressure dry-run safety shutoff, overpressure limits, and storage tank level float switch integration. The hydraulic assembly incorporates an inlet brass solenoid valve, panel-mounted system pressure gauges, an adjustable concentrate drain rotameter (2–18 L/min), and an adjustable concentrate recycle rotameter (5–35 L/min). This specialized recycle loop enables fine-tuned hydraulic recovery up to 75%, substantially minimizing sewer discharge volumes while protecting the six-membrane array from scale formation across varying water qualities.
Technical information
Here are most important things about this product
- Ultra-Compact Slim Footprint: Cuts footprint by 2.65 times compared to standard commercial racks, fitting standard doorway widths and tight technical corridors (0.495 x 0.395 x 1.48 m).
- High Demineralization Throughput: Generates a continuous nominal pure water flow of 1,500 L/h (up to 30,000 L/day) for large commercial and industrial utility loops.
- Premium Grundfos CR 3-15 Booster: Vertical multi-stage AISI 304 stainless steel pump delivers exceptional IE4 energy efficiency with minimal noise and vibration.
- Automated OC5000 Microprocessor Controller: Regulates automated service and standby modes, dry-run safety lockouts, overpressure cutoffs, and tank level switches.
- Dual Rotameter Hydraulic Control: Calibrated rotameters for drain discharge (2–18 L/min) and concentrate recycling (5–35 L/min) allow precise control of system recovery up to 75%.
- Comprehensive Pressure Safety Array: Includes dry-run feed pressure monitoring, module overpressure protection, and a permeate backpressure switch.
- Pre-Wired Industrial Electricals: Central electrical panel configured for standard single-phase 220–230 V power networks.
- Product Type: Commercial 4" Reverse Osmosis Water Treatment Unit
- Manufacturer / Model: Ecosoft / MO30000TP5
- Nominal Permeate Flow Capacity: 1,500 L/h (range: 1,200–1,600 L/h / 350–420 GPH)
- Maximum Daily Permeate Output: Up to 30,000 L/day
- Permeate Recovery (Yield): Up to 75%
- Membrane Vessel Configuration: 6 x 4" (Six 4040 vessels, 300 psi rating; accommodates Filmtec XLE-4040, LCLE-4040, or Ecosoft ELP-4040)
- High-Pressure Pump: Grundfos CR 3-15 (IE4, AISI 304 stainless steel)
- Controller: Ecosoft OC5000 with LCD display (English menu)
- Operating Pressure: 8–12 bar (Maximum limit: 14 bar)
- Influent Water Pressure: 2.0–4.0 bar
- Service Feed Flow Requirement: 2,000–2,500 L/h
- Maximum Raw Water TDS: 3,000 mg/L (ppm)
- Power Supply: 1 x 220–230 V, 50 Hz (1 Phase)
- Rated Electrical Power: 1.4 kW
- Plumbing Connections: Feed water: G 3/4" female thread | Permeate: G 1" male thread | Concentrate: G 1/2" male thread
- Flow Monitoring: Permeate rotameter (5–35 L/min), Concentrate rotameter (2–18 L/min), Recycle rotameter (5–35 L/min)
- Chassis Frame: Heavy-duty powder-coated steel
- Dimensions (Bare System, W x D x H): 0.495 x 0.395 x 1.482 m (495 x 395 x 1482 mm)
- Dimensions (Shipping Crate, W x D x H): 0.50 x 0.40 x 1.50 m
- Weight (Bare Unit / Shipping Crate): 95 kg / 100 kg
- Feed Water Temperature: +5 to +30 deg C
- Total Dissolved Solids (TDS): Up to 3,000 ppm (mg/L)
- Free Chlorine: < 0.1 mg/L
- Total Hardness (without antiscalant): Up to 150 ppm (mg/L) CaCO3
- Total Hardness (with antiscalant dosing): Up to 1,500 ppm (mg/L) CaCO3
- Dissolved Iron: <= 0.1 mg/L
- Manganese: <= 0.05 mg/L
- Silica (SiO2): <= 20 mg/L
- Chemical Oxygen Demand (TOC): <= 5.0 mg O2/L
- Chlorides: <= 500 mg/L (concentrations above 500 mg/L may accelerate pump corrosion)
- Hydrogen Sulfide: None
- Breweries, distilleries, and soft beverage production plants
- Cosmetics, domestic chemicals, and auto detailing chemical manufacturing
- Commercial car washes and touchless spot-free vehicle rinsing lines
- Feed water for commercial and industrial steam boilers and closed cooling circuits
- Commercial greenhouses, hydroponics, and horticulture misting facilities
- Architectural and automotive glass washing and glazing factories
Please note: RO membrane elements (6 pcs required) and permeate storage tanks are not included in the standard delivery package and must be selected according to local source water parameters. The MO30000TP5 does not include an onboard sediment cartridge housing; a dedicated external 5-micron prefiltration system (e.g., Big Blue 20" melt-blown sediment filter) must be installed upstream of the RO unit. A full feed water chemical analysis must be conducted prior to commissioning to size upstream water softeners, ECOMIX systems, or antiscalant dosing units. When commissioning new membrane elements, always discard all permeate produced during the first 15 to 60 minutes directly to the drain.
More Products
These other products might interest you