Internal Reference:
509721
Barcode:
1872025009721
The Luxe Style 55W unit features an energy-efficient 4-pin single-ended UV lamp measuring 925 mm in length, rated for an operational lifespan of up to 8,000 hours. Operating via an electronic ballast on standard 220–240 V / 50 Hz power, it consumes 55 W of power. For electrical safety in residential and utility installations, the stainless steel reactor body is equipped with an integrated protective grounding terminal. With its high treatment throughput and standard threaded connections, the system serves as a dependable biological barrier for demanding domestic and light commercial water purification setups.
Functional Features:
253.7 nm Germicidal Disinfection: Neutralizes pathogens at the cellular level with an intensity of 145 µW/cm² without altering water taste, odor, or chemical composition.
Heavy-Duty AISI-304 Stainless Steel Housing: Corrosion-resistant construction featuring a 1.5 mm wall thickness and an integrated grounding terminal for electrical safety.
High Flow Capacity (2.7 m³/h): Provides continuous biological disinfection delivering up to 2,700 L/h of purified water for whole-building applications.
8,000-Hour Lamp Lifespan: Offers approximately 12 months of continuous, around-the-clock disinfection performance.
Standard 3/4" M Connections: Male-threaded 3/4" ports integrate seamlessly with main residential plumbing lines and pre-filtration systems.
Low 55 W Power Consumption: Delivers robust, high-volume microbiological protection with energy-efficient operation.
Technical Characteristics:
Product Type: Ultraviolet Water Sterilization System
Brand: Luxe Style
Lamp Wattage: 55 W
Flow Rate Capacity: 2.7 m³/h (2,700 L/h)
Lamp Base / Holder: 4 Pins Single Ended
Wavelength: 253.7 nm
UV Intensity (distance = 1 m): 145 µW/cm²
Lamp Lifespan: Up to 8,000 hours
Lamp Dimensions: Length 925 mm, Diameter 15 mm
Housing Material: AISI-304 Stainless Steel (1.5 mm thickness)
Inlet/Outlet Port Size: 3/4" M (Male Thread)
Operating Voltage / Frequency: 220–240 V / 50 Hz
Working Water Temperature: +10 to +60 °C
Feed Water Turbidity Requirement: < 0.1 NTU
Maximum Total Dissolved Solids (TDS): Up to 2000 ppm
Please note: UV disinfection requires optical water clarity to remain effective. Feed water turbidity must be below 0.1 NTU; installing a 1-micron sediment pre-filter cartridge upstream of the unit is strongly recommended. The stainless steel housing must be connected to an electrical ground via the dedicated contact. Replace the UV lamp every 12 months (8,000 hours), and periodically inspect and clean the quartz sleeve to remove mineral scale.
More Products
These other products might interest you

