Internal Reference:
V125CIBTZ-08
Barcode:
1872025008489
Engineered with a solid-state 5-button electronic controller, a high-contrast backlit LCD display, and an internal optical-sensor DC drive with a linearly reciprocating piston and one-piece expanding seal spacer stack, the V125CIBTZ-08 automates scheduled filter backwashing via a 1 to 28-day time-clock override or an external differential pressure (dP) switch. Factory-configured specifically for backwash-only filtration (equipped with a meter port plug, refill port plug, and dual injector plugs without a regenerant piston), the controller allows up to 9 programmable cycle stages in any order. Equipped with a 1.32" OD (1" NPS) or 32 mm distributor pilot, dual solid-state auxiliary relay outputs, and non-volatile EEPROM memory backed by a 24-hour power-loss carry-over and replaceable 3V CR2032 lithium coin-cell battery, this standalone bare valve unit allows installers to select custom port fittings, EU power supplies, external drain line flow controls (DLFC), and bypass assemblies tailored to their exact installation.
Functional Features:
High-Throughput 1.25" Flow Performance: Delivers up to 7.7 m³/h (129 L/min / 34 gpm) in service mode (Cv = 8.8) and 7.3 m³/h (121 L/min / 32 gpm) in backwash mode (Cv = 6.4; requires external DLFC), supporting larger filter vessels up to 24" in diameter.
Dedicated Backwash-Only Factory Configuration: Configured without a turbine water meter or brine draw assembly—featuring factory-installed injector plugs, refill port plug, and downflow main piston for reliable media backwashing and rinsing.
Time-Clock & Differential Pressure (dP) Automation: Initiates scheduled backwash cycles automatically at 1 to 28-day intervals during low-demand hours, with delayed/immediate manual trigger and external dP switch compatibility.
Customizable Multi-Cycle Sequence: Supports up to 9 programmable cycle stages in any order, allowing precise tuning of backwash (1–120 min), rapid rinse (1–120 min), and service pause (1–480 min) durations for specific filter media.
Heavy-Duty Composite Construction & Battery Backup: Glass-filled composite body withstands continuous operating pressures from 1.4 to 8.6 bar (20–125 psi) and features non-volatile EEPROM memory with 24-hour carry-over and CR2032 coin-cell battery backup.
Technical Characteristics of the Control Valve:
Product Type: Automatic Backwash-Only Media Filter Control Valve (Time Clock, Bare Valve Unit)
Manufacturer / Model: Clack Corporation / WS1.25 CI (SKU: V125CIBTZ-08)
Control Logic: Time-Clock Regeneration (1–28 days day override; delayed or immediate manual trigger) and External Differential Pressure (dP) Switch
Service Flow Rate: 7.7 m³/h (129 L/min / 34 gpm at 1 bar / 15 psi drop with 1.25" fitting kit and bypass; Cv = 8.8)
Backwash Flow Rate: 7.3 m³/h (121 L/min / 32 gpm at 1.7 bar / 25 psi drop; Cv = 6.4; acquired via external DLFC)
Water Meter: Not included (factory-equipped with meter port plug; meter-free time-clock operation)
Valve Body Material: Glass-Filled Composite
Programmable Cycles: Up to 9 cycles (Backwash: 1–120 min; Rinse: 1–120 min; Service Pause: 1–480 min)
Compatible Tank Diameters: 6" to 24" media filter pressure vessels (calculated at 407 L/min per m² / 10 gpm per sq. ft. of bed area)
Required Power Input: 15 V DC, 500 mA (European 200–240 V AC, 50/60 Hz power supply adapter sold separately)
Package Contents: Clack WS1.25 CI backwash-only control valve assembly with electronic drive (inlet/outlet fittings, power supply, external DLFC, and bypass valve are not included)
Dimensions and Installation Specifications:
Inlet / Outlet Port Size: 1.25" (compatible with 3/4" to 1.5" NPS connection fittings, sold separately)
Tank Mounting Thread: 2 1/2" – 8 NPSM
Distributor Riser Tube Pilot: 1.32" OD pipe (1" NPS) or 32 mm OD
Drain Line Connection: 3/4" or 1" NPT (requires separate external drain line flow control)
Regenerant / Brine Port: Factory-plugged (refill port plug installed for backwash-only operation)
Valve Height (Above Tank): 187 mm (7 3/8")
Unit Weight: 2.0 kg (4.5 lbs)
Operating Water Pressure: 1.4 to 8.6 bar (20–125 psi)
Operating Water Temperature: +4 to +43 °C (40 to 110 °F)
Please note: This item includes the bare control valve assembly only; the 15 V DC EU power supply adapter, 1.25" inlet/outlet connection fittings, bypass valve, and external drain line flow control (DLFC) are sold separately according to your specific vessel diameter and piping configuration. Install an appropriately sized external DLFC to achieve the required backwash rate and prevent filter media loss during backwash cycles. Use only silicone-based lubricants on O-rings during installation (never petroleum/hydrocarbon-based lubricants), ensure power is disconnected before servicing, and replace the 3V CR2032 lithium backup battery if the time-of-day display flashes after brief power interruptions.
More Products
These other products might interest you



